Main component versions in the release:
• DK2 Driver Version 07.14.0.25
• Nokia Connectivity Cable USB Driver Version 7.1.42.0
• Flash Update Package 2011.24.000
• FLS-x Drivers Version 2.09.28
• FUSE Connection Manager v 2011.25
MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2011_14_4_45945
New Products added
• RM-754, RM-755, RM-804, RM-696, RM-774, RM-761
Products removed
• RM-738, RM-739
New features
• New version of FUSE connection Manager
• New version of Flash Update Package
• New version of Autotuning components
• New version of Product API
• New version of Connectivity Cable Driver
• Installation checks the PC for Microsoft DOT.NET 2 Service Pack 2 and installs  it automatically if PC has online connectin to Internet. If DOT.NET version 2 SP  2 or newer is found, installation continues normally. If PC is not connected to  internet, and DOT.NET needs to be updated installation will be aborted. In this  case DOT.NET must be updated manually before installation of Phoenix can  continue
Error Corrections & changes
• Crash which occurred when Phone Information UI was open simulaneously with  other menu´s has been corrected
• The Envira Tool ( The ZIP package generator in Help / Troubleshooting – menu)  now has a button to delete existing old log files. This makes it possible to  clear old logs before reproducing / logging problems to new log files which are  then easier to analyse.
• “No Connection” – problem, which occurred when a connection without phone  connected was selected has been corrected. Connection without phone can now be  selected.
Please note:
• Microsoft DOT.NET version 2 Service Pack 2 is now the minimum requirement.  Phoenix installation will check PC for the DOT.NET version and update it  automatically when PC has online connection. Without online connection, old  DOT.NET versions must be updated manually.
• New common data package location in use. Please see document SR1315 in KICS  Information Center for further information.
• All Nokia Service Software Applications will use following location for  product specific data:
- Windows XP: C:\Documents and Settings\All Users\Application  Data\Nokia\Packages
- Windows 7: C:\Program Data\Nokia\Packages
• Please see atricles SR1774 and 1786 for more information on the use of Nokia  Data Package manager – tool, and article SR1854 for more information on the  Nokia Service Application Manager Tool.
• During installation, Data Packages should be installed in these directories,  if they install to any other location by default. target folder for local data  packages can be changed in the installation wizard manually
• This version contains the latest Tucson components. Therefore it is not  necessary to use Tucson Add-On Installation Packages
• Before you start Phoenix or Care Suite installation to Windows 7 the User  Account Control (UAC) should be turned off from Windows Control Panel settings.
• For more information concerning new options in “Firmware Update” – menu and  their use, Please see documents SR1313 and SR1659 in KICS Information Center.
• Tucson operations combined with “flash” – option are now handled in the same  way as “refurbishment”, which requires Mass Memory Content File to be available.
• Do not use Flash option simultaneously with product code change for USB Only  phones, flash phone separately with Firmware Update
• It is recommended to use FPS-21 flash prommer with TCPIP connection when  refurbishing USB Only – phones (RM-596 etc) due to mandatory optional MMC file  size.
• Connection media to FLS-5 must be configured to be “USB_FBUS”, after FLS-4  support has been removed FBUS does not work anymore with FLS-5
KNOWN ERRORS & LIMITATIONS
• Software downgrade with Tucson system is only possible for BB 5.0 products  supporting the Data Package 2 concept.
• Flashing with setup FLS-5, SS-46 and product specific adapter is not supported  anymore. FLS-5 can be used with other product specific cables and adapters, but  not with SS-46 Interface Adapter.
• If you install old DCT-4 data packages, Flash Update Package File installation  path may be wrong. This is caused by very old DCT-4 data packages which contain  Flash Update Package and overwrite current information during installation. If  you experience problems when updating FPS-x prommers, please check that Phoenix  “Prommer maintenance” is looking for the files from the correct location which  is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show  error “Update via ini – file failed”. In this case, select “Update” from that  Phoenix “Prommer maintenance” – UI, browse to correct directory and select  “fpsxupd.ini” for all other prommers except the FPS-8.
• Refurbishment flashing and product code change for RX-51 product requires SX-4  card to be available.
• FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer  with new HW version 11 has been released to correct this. Sales pack code is  0089J83 , old HW version is not delivered anymore. Please see article SR1856 in  KICS Information Center for the latest FPS-21 User Guide Document
• Please refer to product specific documents and instructions concerning the  limitations of the RX-51 product
• RX-51 flashing does not work when CU-4 is used
• RX-51 Product Code changes work only without FLASH option, please flash phone  separately
• When version 2010_12_8_42304 or newer with FUSE connection manager is  installed on top of older Phoenix versions, there may be an additional delay of  several minutes when you start Phoenix for the first time. Please wait  patiently; Phoenix will start after configuration is finished.
• When using Data Package download functions with online connection, download  times may occasionally be long. This is not caused by Phoenix (or Care Suite).  The download speed from online servers is occasionally is known to be slow,  depending on how data is buffered on caching servers.
• After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe  processes, or optionally restart your PC
• It is not possible to program Mass Media Content file to some devices over  direct USB cable connection, due to the large size of the file. For these models  a feature called “Media Check” has been implemented. When this type of product  is connected to service software / PC via direct USB cable the refurbishment  option will be disabled. Please use a flash prommer.
• To be able to use the help files in Windows 7 you need to install Windows Help  program (WinHlp32.exe) for Windows 7. Ways to locate WinHlp32.exe:
- Start Phoenix with online connection to Internet, select “Help” and “Phoenix  help”. Click the “Microsoft Help and Support” website link. Download WinHlp32  and install it.- Go to http://www.microsoft.com. Type “WinHlp32″ to “Search  Microsoft.com” – field. Locate Windows Help program (WinHlp32.exe) for Windows 7  and install it
• When using flash prommers, only one connection type to one prommer is allowed.  Please use either NFPD USB or NFPD TCPIP connection to one prommer, not both  connections to same prommer
5. INSTALLATION
• If you have Phoenix External 2007.4.6.170 or older you must uninstall it  before installing this release.
• Download Phoenix_Service_Software_2011_24_2_46258.exe application file to your  computer (e.g. C:\TEMP).
• Close all other programs.
• Disconnect all flash prommers and phones which may be connected to PC via USB  connection (reconnect them only after Phoenix installation has been completed)
• Run Phoenix_Service_Software_2011_24_2_46258 and follow instructions on the  screen to install Phoenix Service Software
• If your PC does not have Microsoft DOT.NET version 2 Service Pack 2 or newer,  and PC is not connected to internet you must update DOT.NET manually to the  required version. When PC has online connection, DOT.NET will be updated  automatically.
• Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the  screen
• If you are prompted to update any existing driver or file versions, select  “yes”.
• Depending on the operating system, the PC may require rebooting.
• Allow Windows to register the Phoenix components.
• Open Phoenix, use FUSE Connection Manager to configure connections depending  on the tools you use
• If you use CU-4, please pair the connection with service adapter by selecting  “pair with service adapter” – option
• Update your prommer with the latest software included in this installation  package.
• Install and use the latest available product specific data packages or flash  bundles
Supported operating systems and user rights
• Windows XP Service Pack 1 or higher
• When installing Phoenix into Win XP you must have local admin rights.
• When using in Win XP, user must have power user rights.
• Windows 7 32 Bit version