حــز و ر ي  للــبــر مــجــة

حــز و ر ي للــبــر مــجــة (http://www.syria4soft.com/vb/index.php)
-   فورمات + إستعادة ضبط مصنع سامسونغ = Format + Reset Factory Samsung (http://www.syria4soft.com/vb/forumdisplay.php?f=408)
-   -   How To Hard Reset Intex Aqua R3 Remove Pattern Lock (http://www.syria4soft.com/vb/showthread.php?t=206)

RashedSoft 05-26-2015 11:27 PM

How To Hard Reset Intex Aqua R3 Remove Pattern Lock

How To Hard Reset Intex Aqua R3 Remove Pattern Lock

Intex Aqua R3 Pattern Lock Remove Solution, How To Remove Pattern Lock From Intex Aqua R3, Hard Reset Keys

This Guide will show you the easiest way to Hard Reset / Master Reset the Intex Aqua R3 using its hardware buttons, You will learn how to use the Volume buttons, Home button, And Power button to restore your Intex Aqua R3 device to its original settings, This operation will delete all the data which are saved on the device internal memory, Nothing will be deleted from the external memory card, So it is better to backup anything you do not want to lose during the Hard Reset.

Before you Hard Reset your Intex Aqua R3:

– The Hard Reset operation will delete all your saved data on your phone, So make a backup first.

– Charge your Intex Aqua R3 battery to be at least at 75% of charging level.

The Intex Aqua R3 Hard Reset / Factory Reset Steps:

– Turn your phone off, Wait until it is completely off.

– Now press and hold these buttons: Volume Down + Power.

– When the Intex Logo appears on screen, Release the three buttons.

– Android Logo will appears on the phone screen.

– Wait until the System Recovery menu appears on screen.

-enter to Recover mode by pressing power key.


Android System Recovery menu appears on screen:
Reboot system now
Apply update from ADB
Apply update from sd card
Wipe data/factory reset
Wipe cache partition


– Use the Volume Down button to select Wipe Data / Factory Reset option.

– Press the Power button to confirm the selection.

– The confirmation message will appear on screen:

Confirm wipe of all user data?

– Scroll down to “Yes — delete all user data” using the Volume Down button.

– Once again, Press the Power button to start the Hard Reset operation.

– You will see the Wiping data steps on screen.

– After the Hard Reset is done, The Reboot System Now option will be selected by default.

– All you have to do now is to press the Power button only.

– The Intex Aqua R3 will be rebooted.

– When the device is completely on, You can start using it, And customizing its settings.

– Done.

الساعة الآن 01:18 AM

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd. TranZ By Almuhajir