حــز و ر ي للــبــر مــجــة - عرض مشاركة واحدة - كيفية إدخال هواوي وضع فاست بوت Huawei Put phone into Fastboot
عرض مشاركة واحدة
  #1  
قديم 06-23-2016, 01:42 PM
أحمد حزوري أحمد حزوري غير متواجد حالياً
Administrator
 
تاريخ التسجيل: Apr 2015
المشاركات: 7,758
آعجبنيً: 252
تلقي آعجاب 1,286 مرة في 855 مشاركة
11 كيفية إدخال هواوي وضع فاست بوت Huawei Put phone into Fastboot

كيفية إدخال هواوي وضع فاست بوت
Huawei Put phone into Fastboot


Huawei android phone FRP unlock

WARNING: FRP can be unlocked only when phone is fully working and not bricked. FRP unlock will erase all user account and phone data.
>>FRP unlock does not unlock Bootloader!<<
>>FRP unlock does not change FRP lock status in fastboot!<<
After FRP erase and restart, phone won't ask you old account details, instead you will be able to sign in with your own. FRP lock status will always show as locked in fastboot.
DC-unlocker can not check if phone is fully working and not bricked! Use it at your own risk. Credits lost in FRP unlock are not refundable or returnable to the user.

Before proceeding with FRP unlock, make sure you have HiSuite installed on pc for phone drivers and that your mobile phone is in fastboot mode.
How to put phone into fastboot see steps below, if phone already in fastboot can skip to FRP unlock process steps

Put phone into Fastboot

Method 1
Phone must be turned off
Press & hold volume-, then plug phone with micro USB cable to pc, this will enter fastboot autmatically
Method 2
Press & hold volume- and power buttons
Method 3
Some phones (like Y560) enter fastboot from recovery menu. At power down state, press volume plus button and power button at the same time until the phone power up. From recovery menu select “reboot to bootloader” to switch the phone into fastboot mode.
Method 4
Extract downloaded ADB toolkit pack, open it. On top of the window click address field once and copy path

Now launch CMD by pressing windows button + R on keyboard, type in cmd and click ok

On cmd window type or paste in path (that we copied earlier) to downloaded and extected adb.exe and press enter on keyboard

To check if you are in the right directory type "adb" in command window
You will get list of supported commands if you specified directory of adb.exe correctly

Now mobile phone is ready to be connected to PC. After connection, if you see any authorization messages make sure you click OK/Next
Open CMD window and type in "adb devices", you will see your device there which means it's ready to be put into fastboot

Type in command - "adb reboot-bootloader" and press enter

Wait until phone restarts into fastboot mode
Now it's ready for unlock process



رد مع اقتباس