حــز و ر ي للــبــر مــجــة - عرض مشاركة واحدة - حلول بعض الاخطاء التى تظهر اثناء التفليش على برنامج SP Flash Tool
عرض مشاركة واحدة
  #1  
قديم 08-15-2015, 10:36 PM
أحمد حزوري أحمد حزوري غير متواجد حالياً
Administrator
 
تاريخ التسجيل: Apr 2015
المشاركات: 7,758
آعجبنيً: 252
تلقي آعجاب 1,284 مرة في 855 مشاركة
افتراضي حلول بعض الاخطاء التى تظهر اثناء التفليش على برنامج SP Flash Tool

حلول بعض الاخطاء التى تظهر اثناء التفليش على برنامج SP Flash Tool


How To Use SP Flash Tool (Full Guide)








مؤخرأ زاد عدد الاجهزة من نوع هاواى ولينوفو والكاتيل وان تاتش وبعض اجهزة جلاكسى الكوبى
التى تحمل معالجات MT65xx وهذة الاجهزة يتم تفليشها باستخدام برنامج SP Flash Tool
وفى بعض الاحيان اثناء عمليات التفليش المختلفة تظهر بعض رسائل الخطأ
ويتغير رقم الخطأ على حسب المشكلة الموجودة فى الهاتف
وفى هذا الموضوع سوف نوضح بعض رسائل الخطأ التى تظهر اثناء عملية التفليش
وبعض الحلول لكل مشكلة




Phone is totally dead


Message: Phone no longer responds to power button


Solution: Follow this guide @ http://forum.hovatek.com/thread-286.html


Phone still not working after flashing
Message: Phone still stuck at Bootlogo or Bootloop


Solution:
* Ensure there's a formatted SD card in the phone before flashing
* Give up to 5 minutes because first boot takes time
* Boot the phone into recovery mode then wipe data / factory reset
* Remove the battery for 30 seconds then slot back in
* Try a firmware upgrade . use MTK droid tools version 2.3.0 to backup usrdata & cache or copy then from the clockworkmod backup
* Try a firmware / ROM from another source




Phone shows white screen,
strange colors or divided screen after flashing
Message: You can see the phone responding to buttons and making sound but all is blurred by white screen


* Solution: The ROM / Firmware you flashed is incompatible, get from another source (especially boot.img , logo.bin and uboot.bin / lk.bin ) -








Phone automatically disconnecting during flashing
Message: The phone makes the disconnecting sound just as flashing begins, interrupting the process


Solution:
* Try a different USB cord, USB port & PC
* Connect the phone to PC via USB cord > Go to device manager > If the device appears as Mediatek DA USB, right-click this item and select Update driver > Proceed with manual driver installation as described @ https://forum.hovatek.com/thread-440.html
* Try holding down the Volume decrease (you could try volume increase or both) while connecting the phone to PC for flashing -


Sp Flash tool remains at 0%
Message: Phone only shows charging sign


Meaning: Necessary drivers have not been successfully installed on the PC


Solution
* Follow this guide @ http://forum.hovatek.com/thread-440.html to manually install vcom drivers


Error 5054





Message: BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054) please check your load matches your target which is to be downloaded


Meaning: The files you're trying to flash do not belong to or are not compatible with the phone you're trying to flash them to


Solution
* Ensure you're using the correct files. If you're sure they are, then try formatting before flashing again


Initialize scatter failed


Message: Error: Initialize scatter file failed. Please check the scatter file name you load is legal


Meaning: SP Flash tool doesn't accept the name format of your scatter file


Solution
* Ensure the scatter file wasn't renamed. If you're certain it wasn't, try a higher version of SP Flash tool


Error 8038



-
Message: Error 8038! Android download pmt is ready and layout has been changed


Meaning: SP Flash tool is having trouble writing to certain partitions due to some incompatibility


Solution
* Format the phone in SP flash tool (Do not format Bootloader) then try flashing the files again using Download
* If Download doesnt work then do a firmware upgrade
* If the MTK backup contains more than one scatter file, retry flashing with the other scatter file.
* If that isn't feasible, try formatting first or use firmware upgrade
* If that doesn't work, open the scatter file using Notepad++ and change __NODL_FAT to FAT by removing "__NODL_" .


Error 4032





Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail


Meaning: SP Flash tool is unable to enable DRAM / communicate effectively with the device


Solution:
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Ensure you tick the boxes for only the files present in the ROM you're about to flash
* Probably have the wrong driver installed. Uninstall vcom, preloader and MTK drivers using usb deview then manually re-install using https://forum.hovatek.com/thread-440.html
* Delete the sp flash tool folder then re-extract
* Ensure the phone is switched off (with battery still inside) before connecting to PC for flashing.
* If that doesn't work, keep holding down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power + volume decrease or power + volume increase).
* Consider using the latest version of Sp Flash tool
* Format the phone before trying to flash the file(s) again




Error 5056





Message: BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)


Meaning: The size of a file is larger than the available / possible partition size


Solution
* Ensure that the file(s) you're trying to flash are actually for your exact phone model
* Try another stock ROM
Error 4001




Message: S_FT_DA_NO_RESPONSE or


Meaning: SP flash tool is having difficulty communicating with the device


Solution:
* Change the USB-port and transfer SP Flash Tool to the root of your main hard drive ( C: ) then run as admin
* Ensure to install the correct drivers (see https://forum.hovatek.com/thread-440.html )


Sp flash tool was successful but phone's calibration doesn't work
Message: Soft keys and touch screen don't work / respond


Solutio
* Edit the scatter file using Notepad++ and remove NODL__ (or set is_download: false to is_download: true ) in front of the items you have in the backup folder but aren't listed when you load the scatter file in SP flash tool. This way, these items will become listed when next you load the scatter file (after saving of course) and therefore flashable


Error 4008





Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)


Meaning: SP Flash tool encountered an error while attempting to flash files


Solution:


* Ensure the battery is in the phone and the phone is switched off before connecting for flashing
* Try using a higher version of SP flash tool
* Change the USB cord and port or PC
* Use the format option then download in SP flash tool


Error 3149





Message: BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)


Meaning: SP Flash tool was unable to flash files to the phone


Solutio


* Ensure the phone is switched off (with a well charged battery in it ) before connecting to PC for flashing
* Try a different PC
* Try a different ROM
* Try a different USB cord
* Try formatting the phone first before flashing files to it


Error 3168
Message: BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)


Meaning: Sp flash tool believes there's a mismatch between the information provided in the scatter file and the phone's info.


Solution:


* Ensure you're using the ROM for the exact phone model
* Try a higher version of SP flash tool
* Ensure to install the correct drivers for the phone on the PC


Error 2004





Message: BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)


Meaning: There was an interruption in the communication between SP flash tool and the device


Solution:


* Ensure the phone's Bootloader is unlocked
* Try a different USB cord
* Try a different port on the PC or another PC
* Ensure the battery is well changed and inside the switched off phone before connecting to PC for flashing

بعض اسباب فشل السوفتوير عند التفليش للهواتف الصيني

رد مع اقتباس