حــز و ر ي للــبــر مــجــة - عرض مشاركة واحدة - طريقة فك غوغل أكاونت سوني - Sony Xperia Z3, Z3+, Z5, M4, C4 FRP Google
عرض مشاركة واحدة
  #1  
قديم 06-27-2016, 11:23 PM
أحمد حزوري أحمد حزوري غير متواجد حالياً
Administrator
 
تاريخ التسجيل: Apr 2015
المشاركات: 7,758
آعجبنيً: 252
تلقي آعجاب 1,284 مرة في 855 مشاركة
11 طريقة فك غوغل أكاونت سوني - Sony Xperia Z3, Z3+, Z5, M4, C4 FRP Google

طريقة فك غوغل أكاونت سوني
Sony Xperia Z3, Z3+, Z5, M4, C4 FRP Google


I am gonna collect here most of FRP ( Google Lock ) Solutions for Sony Xreria. Hope fully below method help you to remove / Bypass FRP .All the method you can try in any sony and report here

Method Number 1 Tested On Sony Z3+
Hide
Remove protected screen sony
MXTP new lock Sony

The time ranges from 25 to 15 seconds, depending on the model. The xperia M4 is what it is as long (easier)
then you must be fast in every procedure and when the time runs out the lock screen and then shown it takes
restart to continue or repeat step not finished.

1. Format the first device

2- set the language for the access to add guest mode on the screen
it is normal the screen is black and not display the language options then restart up to show the initial settings options.
complete the settings (language settings etc ..) should complete until the end that opens the menu
the end time will show the protective screen to restart unit to continue, or go to the next step.

3- In the protected screen enable one wifi network, after already one authenticates Wi-Fi network does not restart the machine and knife Step 3

4- Enable guest mode. click on 2x power at the blue screen puche you notify and click on the doll (top right)
the end time will show the protective screen device restart and continue!

5- Add new account to PlayStory
the end time will show the protective screen device restart and continue!

6- Make a shortcut menu settings to the first screen, so already point
the end time will show the protective screen device restart and continue!

7- Attention latter step can only be done once. If the time runs out to repeat.
reset the machine go into menu and reset the device starts again from step 1
Please settings and click on safety and open the proteção_my_experia, click Enable, and then click Disable protection.

8 in this step the device already has no lock but the bill is still in the device.

9- knife login with the new account, enable and disable, then knife a total device reset the menu
settings, backup and reset






رد مع اقتباس