جميع تحديثات ريف جيتاغ - Riff Jtag Updates - حــز و ر ي للــبــر مــجــة

إضغط هنا لمشاهدة أحدث العروض

معظم خدمات فك الشيفرة وتغيير الإيمي وكتابة السيرت وحذف غوغل لا تحتاج بوكسات إطلاقاً

مسح FRP غوغل أكاونت لكل أجهزة سامسونغ بجميع الإصدارات خلال ثانية

مسح FRP غوغل أكاونت لكل أجهزة هواوي بجميع الإصدارات خلال ثانية

بي إس تي دونغل الأصلي BST Dongle

بوكس زد ثري إكس سامسونغ برو جيكوب الذهبي الأصلي Z3X Samsung Pro Jcop Gold

سيغما كيه الأصلية Sigma Key

ميراكل بوكس المعجزة الأصلي Miracle Box

أدفانس توربو فلاشر جيتاغ الذهبي الأصلي المفعل بالكامل ATF Turbo Jtag Gold

أوكتوبوس بوكس الأصلي سامسونغ + إل جي + سوني - Octopus Samsung + LG + Sony

بشرى لكل من يمتلك بوكس أدفانس توربو - ATF-V3 - All-in-1 Ultimate Adapter

فيوريوس غولد مفعل بالكامل من 1 حتى 11 Furious Gold Full 1 To 11 active

أقوى عرض سوف تحصل عليه وتكسب 107 دولار - BST + Miracle + Z3X Pro + Jig

زد ثري إكس إيزي جيتاغ مفعل بالكامل + سامسونغ برو + إل جي

أقوى و أسرع هب يو إس بي ثري في العالم 4 مخارج

إكس تي سي كليب الأصلي الجديد XTC 2 Clip

ملفات سيرت Cert أصلية مكفولة من شركة سامسونغ بسعر 10 دولار فقط

تورنادو توربو الجديد الشامل - UFSx Turbo

تفعيل كافة واجهات إلجي على بوكس زد ثري إكس Z3X LG Active

ميدوسا برو بوكس جيتاغ + إي إم إم سي الجديد Medusa PRO Box

المجهر الإلكتروني الرائع Usb Microscope

هارد سامسونغ 2 تيرا محمول Samsung M3 USB 3.0 Portable Hard 2TB

زد إكس دبليو دونغل ملك مخططات الصيانة - Zxw Dongle

أفينجرس بوكس الأصلي مفعل بالكامل Avengers Box

يو إف آي بوكس جيتاغ - UFi Jtag

ألتيمايت مالتي بوكس الأصلي مفعل بالكامل - UMT

يوني أندرويد تول - Uni Android Tool - UAT

مايكرو إتش تي سي برو مفعل بالكامل - Micro HTC Pro

شيميرا مفعل بالكامل سامسونغ+إلجي+بلاك بيري+نوكيا لوميا+إتش تي سي+هواوي - Chimera Full

دي سي أنلوكر فونيكس الأصلي - Dc-Unlocker Phoenix

سيتول فيوجون بوكس الأصلي مفعل بالكامل SeTooL Fusion Full

الوصلة السحرية ماجيك أندرويد أوتو بوت كيه = Magic Android USB Auto Boot Key

أوكتوبوس بوكس سامسونغ أو إلجي الأصلي Octopus Samsung LG Box

بوكس زد ثري إكس إيزي جيتاغ الأصلي Z3X Easy Jtag Emmc

دونغل أسان هوا الشامل مفعل بالكامل - Asan HUA

دونغل أسان سام الإحترافي مفعل بالكامل - Asan Sam

تفعيل ميراكل بوكس بسعر 33 دولار فقط لا غير - Miracle Box Active

عرض إتش تي سي الذي لا يصدق - HTC offer يجعلك تكسب مائة 100 دولار

أقوى و أشمل و أرخص برنامج هواوي في العالم بدون بوكسات أوكريديت - HDE-hcu Huawei

E-Mate Pro eMMC Tool

إي إم إم سي برو أقدم واسهل فريق جيتاغ في العالم - Emmc Pro

مسح غوغل أو سامسونغ أكاونت كأنك وكيل سامسونغ = Samsung FRP + Scloud

كبل كوالكوم السحري - EDL - Deeb Flash - Qualcomm Cable

يو إفي آي دونغل ملك أسوس ومعالجات إنتل - Ufi Dongle

آر إكس توربو جيفي سيم لفك شيفرة وتفعيل جميع منتجات أبل Unlock Active Apple

إنفيرنو كيه Inferno Key ملك الحصريات ولا يمزح أبداً

إي إف تي دونغل EFT Dongle أفضل برنامج لتعريب الأجهزة في العالم

إن سي كيه برو 3 في 1 - أفينجرز + يو إم تي + إن سي كيه = Nck Pro+UMT+Avengers

دونغل بور أدابتور كليب - Power Adapter - Xtc2Clip

كبل غوغل يوأرت السحري - FRP UART USB Magic Cable

تفعيلات ميراكل ثاندر - MIRACLE Packs + Activation Info

دونغل جميع خدمات هواوي مدى الحياة - HCU+Phoenix+Converter

برنامج إتصال دولي بدون شريحة وإظهار الرقم الذي تريده أو بدون رقم - Mobile Voip

ثاندر ميراكل دونغل - Thunder Miracle Dongle

دونغل مسح غوغل الخيالي = FRP Magic Dongle

مسح حساب غوغل لتلفونات هواوي بدون بوكسات مهما كان الإصدار = FRP Huawei Erase

تفعيل فالكون على بوكس ميراكل Falcon Active

تفعيل جميع خدمات هواوي على بوكس ميراكل - Miracle Huawei TooL

العرض الذي لن يتكرر

إن سي كيه برو 3 في 1

أفينجرز + يو إم تي + إن سي كيه = Nck Pro+UMT+Avengers

ثمنهم 129+129+129=387 دولار

انت سوف تدفع 129 دولار فقط وتحصل عليهم

 

عرض أسان القوي - أسان سام الإحترافي مفعل بالكامل + أسان هوا الشامل مفعل بالكامل = بسعر 129 دولار فقط

 

يرجى وضع إسمك أو إسم محلك ورقمك لكي يتم إضافتك إلى غرفة واتس أب أحدث الأسعار و الأخبار

 

للتواصل وطرق الدفع

إتصل بنا

أبو جبريل

تلفون - واتس - فايبر - لاين

00905367214617

-----------

حزوري للبرمجة وكلاء رسميين لهذه البوكسات - Syria4Soft.Com Reseller

 

الوكلاء المعتمدون

--------

أضنة - سلمان حزوري - شارع السوريين - محل موبايلي - 05365575422

غازي عنتاب - أبو علاء - تشارشي مول - مركز علاء الدين - 0537607520

مرسين - خالد درويش - مزتلي - آخر نزلة البلدية - دبي للإتصالات - 05377622108

الرياض - فيصل الحربي - المرسلات - شارع هشام عبد الملك - سكاي - 0554581951

عين العرب - خورشيد - 05396962999 -0933095501

إستنبول - صهيب حزوري - إمينونوه - تهتكليه - يلدزخان - 05342020289


العودة   حــز و ر ي للــبــر مــجــة > منتدى البوكسات الأصلية والدناغل = Original Box & Dongle > باقي البوكسات الأصلية = Other Original Box > ريف جيتاغ = Riff Jtag
التسجيل التعليمـــات التقويم البحث مشاركات اليوم اجعل كافة الأقسام مقروءة

إضافة رد
 
أدوات الموضوع إبحث في الموضوع انواع عرض الموضوع
  #1  
قديم 09-15-2017, 04:45 AM
أحمد حزوري أحمد حزوري غير متواجد حالياً
Administrator
 
تاريخ التسجيل: Apr 2015
المشاركات: 7,757
آعجبنيً: 252
تلقي آعجاب 1,272 مرة في 849 مشاركة
4 جميع تحديثات ريف جيتاغ - Riff Jtag Updates

جميع تحديثات ريف جيتاغ
Riff Jtag Updates



رد مع اقتباس
  #2  
قديم 09-15-2017, 04:46 AM
أحمد حزوري أحمد حزوري غير متواجد حالياً
Administrator
 
تاريخ التسجيل: Apr 2015
المشاركات: 7,757
آعجبنيً: 252
تلقي آعجاب 1,272 مرة في 849 مشاركة
4 Riff Jtag - Xiaomi REDMi 4A - 15-09-2017

Riff Jtag - Xiaomi REDMi 4A
15-09-2017


Newly released ISP DLL-s:

- Samsung A310F
- Samsung I9190
- Samsung J320H
- Samsung P3100
- Samsung T989
- Xiaomi Redmi 4A

Please click "Check for Updates" button to download newest set of repair DLL-s.



رد مع اقتباس
  #3  
قديم 05-04-2018, 12:56 PM
أحمد حزوري أحمد حزوري غير متواجد حالياً
Administrator
 
تاريخ التسجيل: Apr 2015
المشاركات: 7,757
آعجبنيً: 252
تلقي آعجاب 1,272 مرة في 849 مشاركة
4 RIFF Box updates = 170 New Models added

RIFF Box updates = 170 New Models added
مبارك لأصحاب بوكس الريف
عاد من جديد وبقوة


Please take not about some changes in RIFF Box support.

- Web download server (self registration required with working e-mail address)
- Frequency of updates increased
- Technical support at RIFF Box official forum (Support tickets)


Please see bellow list of uploaded Boot repair packs in last few weeks:

HTC Models Boot repair, Read/Write eMMC ISP pinout
  • HTC_OneA9u_2PQ910000_ISP.dll
  • HTC_OneM8y_0P6B63000_ISP.dll
  • HTC_OneM9u_0PJA10000_ISP.dll
  • HTC_OneS9u_2PRG20000_ISP.dll
  • HTC_OneX9u_2PS510000_ISP.dll
  • HTC_SensationXL_PI3920000_ISP.dll
Huawei Models Boot repair, Read/Write eMMC ISP pinout
  • Huawei_P7_L10_ISP.dll
  • Huawei_P8_Lite_ISP.dll
  • Huawei_U8860_ISP.dll
Lenovo Models Boot repair, Read/Write eMMC ISP pinout
  • Lenovo_A1000F_ISP.dll
LG Models Boot repair, Read/Write eMMC ISP pinout
  • LG_AS330_ISP.dll
  • LG_D160_ISP.dll
  • LG_D280n_ISP.dll
  • LG_D285_ISP.dll
  • LG_D290n_ISP.dll
  • LG_D295_ISP.dll
  • LG_D295F_ISP.dll
  • LG_D320n_ISP.dll
  • LG_D325_ISP.dll
  • LG_D380_ISP.dll
  • LG_D390n_ISP.dll
  • LG_D410_ISP.dll
  • LG_D410HN_ISP.dll
  • LG_D605_ISP.dll
  • LG_D618_ISP.dll
  • LG_D625_ISP.dll
  • LG_D631_ISP.dll
  • LG_D722V_ISP.dll
  • LG_D724_ISP.dll
  • LG_D821_ISP.dll
  • LG_D838_ISP.dll
  • LG_D851_ISP.dll
  • LG_D855_ISP.dll
  • LG_D856_ISP.dll
  • LG_E980_ISP.dll
  • LG_F100L_ISP.dll
  • LG_F100S_ISP.dll
  • LG_F160LV_ISP.dll
  • LG_F240K_ISP.dll
  • LG_F350S_ISP.dll
  • LG_F440L_ISP.dll
  • LG_F460K_ISP.dll
  • LG_F670L_ISP.dll
  • LG_H324_ISP.dll
  • LG_H345_ISP.dll
  • LG_H410_ISP.dll
  • LG_H422_ISP.dll
  • LG_H443_ISP.dll
  • LG_H525n_ISP.dll
  • LG_H631_ISP.dll
  • LG_H635_ISP.dll
  • LG_H734_ISP.dll
  • LG_H788_ISP.dll
  • LG_H790_ISP.dll
  • LG_H811_ISP.dll
  • LG_H815_ISP.dll
  • LG_H818P_ISP.dll
  • LG_H845_ISP.dll
  • LG_H901_ISP.dll
  • LG_K120K_ISP.dll
  • LG_K330_ISP.dll
  • LG_K550_ISP.dll
  • LG_K600_ISP.dll
  • LG_L23_ISP.dll
  • LG_L24_ISP.dll
  • LG_LMX210MA_ISP.dll
  • LG_LS450_ISP.dll
  • LG_LS660_ISP.dll
  • LG_LS665_ISP.dll
  • LG_LS675_ISP.dll
  • LG_LS740_ISP.dll
  • LG_LS770_ISP.dll
  • LG_LS775_ISP.dll
  • LG_LS777_ISP.dll
  • LG_LS885_ISP.dll
  • LG_LS990_ISP.dll
  • LG_LS991_ISP.dll
  • LG_LS996_ISP.dll
  • LG_LU620_ISP.dll
  • LG_M200N_ISP.dll
  • LG_M250N_ISP.dll
  • LG_M320_ISP.dll
  • LG_M400DY_ISP.dll
  • LG_MS210_ISP.dll
  • LG_MS323_ISP.dll
  • LG_P715_ISP.dll
  • LG_P765_ISP.dll
  • LG_P769_ISP.dll
  • LG_P930_ISP.dll
  • LG_SU870_ISP.dll
  • LG_TP450_ISP.dll
  • LG_US215_ISP.dll
  • LG_US550_ISP.dll
  • LG_V520_ISP.dll
  • LG_VS410PP_ISP.dll
  • LG_VS425LPP_ISP.dll
  • LG_VS810PP_ISP.dll
  • LG_VS880PP_ISP.dll
  • LG_VS930_ISP.dll
  • LG_VS986W_ISP.dll
  • LG_VS990_ISP.dll
Motorola Models Boot repair, Read/Write eMMC ISP pinout
  • Motorola_XT1021_ISP.dll
  • Motorola_XT1022_ISP.dll
  • Motorola_XT1030_ISP.dll
  • Motorola_XT1032_ISP.dll
  • Motorola_XT1034_ISP.dll
  • Motorola_XT1064_ISP.dll
  • Motorola_XT1068_ISP.dll
  • Motorola_XT1097_ISP.dll
  • Motorola_XT1541_ISP.dll
  • Motorola_XT1550_ISP.dll
  • Motorola_XT1562_ISP.dll
  • Motorola_XT1563_ISP.dll
  • Motorola_XT1642_ISP.dll
  • Motorola_XT1676_ISP.dll
  • Motorola_XT1706_ISP.dll
  • Motorola_XT1723_ISP.dll
Nokia Models Boot repair, Read/Write eMMC ISP pinout
  • Nokia_Lumia_930_ISP.dll
Pantech Models Boot repair, Read/Write eMMC ISP pinout
  • Pantech_A760S_ISP.dll
  • Pantech_A860L_ISP.dll
  • Pantech_A860S_ISP.dll
  • Pantech_A870L_ISP.dll
Samsung Models Boot repair, Read/Write eMMC ISP pinout
  • Samsung_A710F_ISP.dll
  • Samsung_E110S_ISP.dll
  • Samsung_E170K_ISP.dll
  • Samsung_E170L_ISP.dll
  • Samsung_E250L_ISP.dll
  • Samsung_E270K_ISP.dll
  • Samsung_E300K_ISP.dll
  • Samsung_E310L_ISP.dll
  • Samsung_G313H_ISP.dll
  • Samsung_G318HZ_ISP.dll
  • Samsung_G360H_ISP.dll
  • Samsung_G530H_ISP.dll
  • Samsung_G531F_ISP.dll
  • Samsung_G570F_ISP.dll
  • Samsung_I317_ISP.dll
  • Samsung_I8190_ISP.dll
  • Samsung_I8262_ISP.dll
  • Samsung_I9100_ISP.dll
  • Samsung_I9105_ISP.dll
  • Samsung_I9195_ISP.dll
  • Samsung_I9505_XXUHPK2_ISP.dll
  • Samsung_I9515_XXU1ANK2_ISP.dll
  • Samsung_J120F_ISP.dll
  • Samsung_J210F_ISP.dll
  • Samsung_J500F_ISP.dll
  • Samsung_J500FN_ISP.dll
  • Samsung_J700H_ISP.dll
  • Samsung_M380S_ISP.dll
  • Samsung_P3110_ISP.dll
  • Samsung_P3113_ISP.dll
  • Samsung_P601_ISP.dll
  • Samsung_S5282_ISP.dll
  • Samsung_S6790_ISP.dll
  • Samsung_S7562_ISP.dll
  • Samsung_T211_ISP.dll
  • Samsung_Z130H_ISP.dll
  • Samsung_Z130H_R07_ISP.dll
Sony Models Boot repair, Read/Write eMMC ISP pinout
  • Sony_C1504_ISP.dll
  • Sony_D5503_ISP.dll
  • Sony_D5803_ISP.dll
  • Sony_E2303_ISP.dll
  • Sony_E2333_ISP.dll
  • Sony_E2353_ISP.dll
  • Sony_E5563_ISP.dll
  • Sony_F3111_ISP.dll
  • Sony_LT26I_ISP.dll
  • Sony_LT26II_ISP.dll
  • Sony_LT28H_ISP.dll
  • Sony_ST25_ISP.dll
VolksWagen Audio head: (JTAG)

  • VolksWagen_RCD330GPlus.dll
XiaoMi Models Boot repair, Read/Write eMMC ISP pinout
  • Xiaomi_Redmi4X_ISP.dll
  • Xiaomi_RedmiNote4X_ISP.dll
To download and install updates, click "Check for Updates" button on "Box Service" tab.
You can also register an account at Turbo-Support download server:

http://www.unlockforum.com/forumdisplay.php/riff-jtag-box-support-202.html





رد مع اقتباس
  #4  
قديم 05-07-2018, 02:26 PM
أحمد حزوري أحمد حزوري غير متواجد حالياً
Administrator
 
تاريخ التسجيل: Apr 2015
المشاركات: 7,757
آعجبنيً: 252
تلقي آعجاب 1,272 مرة في 849 مشاركة
4 RIFF Box eMMC Plugin - File System explorer for MTK = eMMC Plugin v4.08

RIFF Box eMMC Plugin
File System explorer for MTK
eMMC Plugin v4.08


Please download latest version of our great tool - eMMC Plugin v4.08.

Whats new:

  • Added full support for MTK internal partition descriptor
  • Added support for MTK MBR/EBR
  • Added file system explorer support for MTK models
  • Added manual selection of parsing method - now its possible to force parsing GPT/MBR in Samsung flash dumps (useful in cases with preloader in boot partition 1)
  • Added manual selection to force MTK MBR/EBR parsing instead of MTK Internal partition layout parsing.
Lets review most important functions present now:


File systems and partitions:



  • File system explorer which supports EXT2/EXT3/EXT4 and FAT32
  • Exporting detected partitions in raw binary format
  • Exporting detected partitions as logical drive
  • Exporting single files from file system in selected partition
Boot loaders, EFS, NVRAM or any other important partitions manipulation:
  • Load Full flash dump and export partitions to separate files
  • Load full flash dump and write GPT or any other partition to another eMMC chip
  • Load GPT and inject binary files into designated partitions (for example load boot loader files from firmware)
  • Read single partition raw binary
  • Write single partition raw binary
  • Build custom flash dump files
  • Read Product Info partition from HTC models and modify CID/IMEI/Simlock status.
  • ...
Useful tips:
  • If flash dump with corrupted partition is loaded, "Out of Memory" message may appear after some time. This can be caused by corrupted directory structure where parser enters into loop. In such case, kill the application via task manager, save such partition as binary file and write it to usb flash disk as "disk image". File system repair can be attempted and data salvaged using Windows or Linux tools.
  • MTK files with MBR styled layout need a bit longer time to be parsed and in case plugin appears to be frozen just give it some time
Please check attached screens. That is full flash dump from MTK based "i9500 clone".











رد مع اقتباس
  #5  
قديم 05-15-2018, 10:41 AM
أحمد حزوري أحمد حزوري غير متواجد حالياً
Administrator
 
تاريخ التسجيل: Apr 2015
المشاركات: 7,757
آعجبنيً: 252
تلقي آعجاب 1,272 مرة في 849 مشاركة
4 Riff JTAG Manager v1.78, eMMC Plugin v4.09

Riff Box
JTAG Manager v1.78
eMMC Plugin v4.09





RIFF Box v1/v2 updates, 15.05.2018:


RIFF Box JTAG Manager v1.78
---------------------------
- (SDK): more functions are now available (exported) for future Resurrector DLLs;
- PKG Editor: added button 'Visual Conditional Writes' - which helps sorting write actions into specified groups of conditions
Those who have experience in PKG creation will understand the purpose.
- Fixed SD/MMC voltage list for RIFFBOX1
- Fixed correct partition name logging when reading/writting via Direct EMMC interface




RIFF Box v1 users now have option to fine tune VCCIO (VCCQ) voltage in order to achieve best stability.
VCCIO can be increased/decreased in 0.05v steps. We recommend this procedure if nominal 1.8v VCCIO doesn't work properly.


eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v4.09

-------------------------------------
- "Load Firmware Files" button is added. This feature will allow to load official firmware files directly into recognized partitions.
At the release moment only MTK Scatter Files are supported.
- Added MTK Scatter Files support. Please note, to load a Scatter File, first is required for plugin to Load a valid Dump (Load Layout from File or read Layout from Device (Load Layout from Device).
After partitions layout is recognized by plugin, a Scatter File can be loaded: files of partitions listed in scatter file will be automatically injected into current Layout.




- Plugin now supports OTHERS THAN the User Area partition!!!



For example, if after parsing, plugin detects extra used partitions (e.g. boot partition1 in some Samsung phones, boot partition1,2&RPMB in some phones with MTK MCU-based layout)
then these partitions are displayed in the partitions list too. User can work with these partitions as usual - read/write, inject data from file, storing to disk, etc - plugin
will automatically manage data redirection to proper hardware locations of the eMMC chip.
- Added column "LOCATION ON CHIP" - displays hardware location of the current partition inside the eMMC Chip (Boot parition1,2, User Area, etc.)
- Keyboard shortcuts are added for Read Partitions button (F6) and Flash partition button (F7)
- Context menu is expanded with same new minor features (right-click on any partition in the partitions list window)
- 'PRESENT' column is added to the partitions list. This shows info about each partiton - whether partition is available in dump file or dump ends prematurely
(100% - means partition is completely present in dump file, 0% - partition is not present in dump file, between 0 and 100 - partition is partially available, but a definite part of it is not available due to premature end of dump file)
- 'SIZE' column is added to the partitions list. This shows human-understandable size in KBs/MBs/GBs/TBs
- HEX window now supports 'NOT_AVAILABLE' data displaying: the '**' is displayed instead of HEX data for areas when data is not available
(for example this is true when local dump file size is less than current partition address, so the plugin cannot obtain data for such case)
(for example this is true when plugin failed to read data on-the-fly due to read errors)
- Progress bar in HEX window is fixed for chunks of data of size up to ~32GB, but still is not full 64-bit wide, thus weird behaviour is expected for partition sizes more than ~32GB (more than 0x7FFFFFFF0 bytes = 31,9999GB)
- Due to obsolete meaning, removed ACTIVE and SELECTED columns in the parsed partitions list.
- Added new column 'RELATIVE PARTITION' to the parsed partitions list. Plugin now supports relative partitions, base of which depends on connected physical eMMC chip.
Thus the real address is calculated by plugin on-the-fly, during read/write operations.
For relative partitions, 'RELATIVE PARTITION' column shows relative offset from the end of the chip area where partition must be located. In this case the 'STARTING OFFSET' column shows
absolute address calculated at the moment of parsing (that is if partitions were parsed from dump file, the starting offset is calculated using dump's file size; if partitions were parsed from connected emmc device,
then starting offset is calculated using current emmc chip's user area size). This address will be recalculated every time any read/write on this partition is performed.
P.S. Real life relative partitions can be found in MTK-based devices (BMPOOL partition), Samsung phones (SGPT partition)
- added keyboard control to the partitions list window. One can navigate through partitions with keyboard keys,
select/deselect single entry with ENTER key, use INSERT key to select an entry and automatically move cursor down.
In case the plugin is invoked by the JTAG Manager (PKG Editor, MassStorage selector, etc.) the ESC key serves the function of buttons "Back to MassStorage" and "Back to PKG Editor"
- The order of focused controls when TAB key is pressed is sorted correctly.
- Option "When parsing is possible from GPT and PIT, force discarding PIT so GPT data is used" is transfered to CheckBox for better convenience. It is named "PIT Dumps -> Force EFI Layout"
- Option "When parsing is possible from MBR and MTK Tables, force discarding MTK layout, so data from MBR/EBR is used" is transfered to CheckBox for better convenience. It is named "MTK Dumps -< Force MBR Layout"
- Double progress is implemented - to display read/write progress of current partition and total read/write progress of selected group of partitions
- Color of selected text in partitions list window is adjusted
- For MBR/EBR parsing added feature to resize last partition into reasonable size: sometimes last partition is reported having maximum possible size (~2TB).
If layout is read from device then last partition is resized to fit into the current memory chip.
If layout is read from a local dump file then the last partition is resized to fit into the 58.25GB memory chip.
- after parsing supported file system into Embedded F/S Explorer, loss of foreground position of the main plugin window bug is fixed
- 'Check for Blank' operation is made more informative: each partiton checking progress is drawn. Blank partitions are grayed out in the partitions list, so blank partitions are visible instantly.
Checking for blank is improved - partitions which have "NOT_AVAILABLE" data status are considered to be blank and time is not lost doing unnecessary checks (especially big sized partitions)



LG Models boot repair, ISP pinout, Read/Write eMMC:

  • LG D335
  • LG E440
  • LG E445
  • LG E450
  • LG K220DS
  • LG K410
  • LG K430
Samsung Models boot repair, ISP pinout, Read/Write eMMC:
  • Samsung A500fU
  • Samsung G800F
  • Samsung G900H
XiaoMi Models boot repair, ISP pinout, Read/Write eMMC:
  • Xiaomi Mi 5X (MDT2)
  • Xiaomi Redmi Note 5A Prime (MDG6S)


To download and install updates, click "Check for Updates" button on "Box Service" tab.
You can also register an account at Turbo-Support download server:


Index of ../../RIFF/RIFF_ROOT/




RIFF Box v1 (Black box) users who havent used 15 days trial can activate it after installing JTAG Manager v1.76 and downloading new data.
In case that trial period is used but fw version is still 1.48 or older, please request trial reset in "Account recovery" section.
Box S/N and "Trial reset" required.















رد مع اقتباس
  #6  
قديم 05-31-2018, 08:06 AM
أحمد حزوري أحمد حزوري غير متواجد حالياً
Administrator
 
تاريخ التسجيل: Apr 2015
المشاركات: 7,757
آعجبنيً: 252
تلقي آعجاب 1,272 مرة في 849 مشاركة
4

Riff Jtag Emmc 31-05-2018

يوكس الريف يعود وبشكل قوي جداً




RIFF Box updates, 31.05.2018
  • Texet TM3204R
Sony Models boot repair, ISP pinout, Read/Write eMMC:
  • Sony G3221
  • Sony F3311
  • Sony F3112
  • Sony E5363
  • Sony E2312
  • Sony D2203
  • Sony C6903
  • Sony C6603
  • Sony C6602
Samsung Models boot repair, ISP pinout, Read/Write eMMC:
  • Samsung I9506
  • Samsung I9308
  • Samsung I9295
  • Samsung I9250
  • Samsung I9228
  • Samsung I9205
  • Samsung I9200
  • Samsung I9152
  • Samsung I9003
  • Samsung Z300H
  • Samsung I9001
  • Samsung I605
  • Samsung I527M
  • Samsung G3812
  • Samsung G900T
  • Samsung G800F ver2 (ISP Pinout, no desolder)
  • Samsung G900J
  • Samsung G900F
  • Samsung G900A
  • Samsung G750A
  • Samsung G600FY
  • Samsung G532M
  • Samsung G531H
  • Samsung G530T
  • Samsung G530P
  • Samsung G386W
  • Samsung G386T
  • Samsung G386F
  • Samsung G360T1
  • Samsung G360T
  • Samsung G360P
  • Samsung G360G
  • Samsung G316HU
  • Samsung E270S
  • Samsung C105
  • Samsung C101
  • Samsung J100VPP
  • Samsung J100M
LG Models boot repair, ISP pinout, Read/Write eMMC:
  • LG P895
  • LG H791
  • LG F460S
  • LG F460L
To download and install updates, click "Check for Updates" button on "Box Service" tab.
You can also register an account at Turbo-Support download server:


Index of ../../RIFF/RIFF_ROOT/




RIFF Box v1 (Black box) users who havent used 15 days trial can activate it after installing JTAG Manager v1.76 and downloading new data.
In case that trial period is used but fw version is still 1.48 or older, please request trial reset in "Account recovery" section.
Box S/N and "Trial reset" required.






رد مع اقتباس
  #7  
قديم 06-04-2018, 11:27 AM
أحمد حزوري أحمد حزوري غير متواجد حالياً
Administrator
 
تاريخ التسجيل: Apr 2015
المشاركات: 7,757
آعجبنيً: 252
تلقي آعجاب 1,272 مرة في 849 مشاركة
4 Riff Jtag Emmc 04-06-2018

Riff Jtag Emmc 04-06-2018


RIFF Box updates, 04.06.2018
  • ZTE Blade A610
HTC Models boot repair, ISP pinout, Read/Write eMMC:
  • HTC Desire 516
  • HTC Desire D728w (2PQ81000)
Samsung Models boot repair, ISP pinout, Read/Write eMMC:
  • Samsung T567V
  • Samsung T555
  • Samsung T535
  • Samsung T377P
  • Samsung T337T
  • Samsung T331
  • Samsung T311
  • Samsung T310
  • Samsung T285YD
  • Samsung T285
  • Samsung T210
  • Samsung SCL23
  • Samsung SCL21
  • Samsung S7275Y
  • Samsung P5200
  • Samsung N7105
  • Samsung P5210
  • Samsung P605
  • Samsung P555
  • Samsung N9005
  • Samsung N7108
  • Samsung N900J
  • Samsung J7008
  • Samsung J3110
  • Samsung J710FN
  • Samsung J700F
  • Samsung J700
  • Samsung J321AZ
  • Samsung J320P
  • Samsung J320F
  • Samsung J320AZ
  • Samsung J320A
  • Samsung J200M
  • Samsung J120AZ
  • Samsung J120A
  • Samsung J111M
  • Samsung J106H
Nokia Models boot repair, ISP pinout, Read/Write eMMC:
  • Nokia Lumia 610 (RM-835)
  • Nokia X2 (RM-1013)

To download and install updates, click "Check for Updates" button on "Box Service" tab.
You can also register an account at Turbo-Support download server:


Index of ../../RIFF/RIFF_ROOT/






رد مع اقتباس
  #8  
قديم 06-23-2018, 06:00 AM
أحمد حزوري أحمد حزوري غير متواجد حالياً
Administrator
 
تاريخ التسجيل: Apr 2015
المشاركات: 7,757
آعجبنيً: 252
تلقي آعجاب 1,272 مرة في 849 مشاركة
4 RIFF Box v1/v2 - 34 new , v1.79 JTAG Manager and v1.50 Firmware

RIFF Box v1/v2 - 34 new
v1.79 JTAG Manager
v1.50 Firmware


RIFF Box JTAG Manager v1.79, RIFF Box firmware v1.50
RIFF Box Firmware 1.50
---------------------------
- Fixed RIFFBOX2 Firmware bug: when reading any data from eMMC Chip, the Data CRC16 was not checked, so even data received with errors was considered to be valid.
Now RIFFBOX2 Firmware detects data CRC16 errors, and guarantees data read from eMMC chip is valid.
RIFFBOX1 Firmware is not affected by this bug, but firmware update is required to update to 1.50 version string.
- Fixed timing bug which prevented to change BOOT and RPMB partitions sizes


RIFF Box JTAG Manager 1.79
---------------------------
- Added context menu for the PKG editor - right-click on data write actions allows to perform alignment of the selected ation's data. Normally alignment is performed when adding new write memory action.
This feature allows to align actions in selectable manner, after all write actions were added to the list. This feature is handy when adding full list of write actions via eMMC Plugin,
and when some partitions are required to remain full size, and others are allowed to be cut/aligned
- "eMMC/SD Access" Page -> "Data Length" Field, ComboBox with pre-set lengths, 'File Size': when selected, Data Length field is filled with value equal to selected File's size.
Now File size is automatically aligned to 0x200. JTAG Manager automatically handles non-aligned to 0x0200 files - the remaining data is filled with 00s.
- Added "Load EXT_CSD Register" feature to the eMMC/SD Advanced dialog. It is possible now to load 0x200-byte EXT_CSD register into currently connected eMMC context;
Format supported: plain binary format, 0x200 bytes size of file; most often these are files with extentions '*.bin' and '*.extcsd';
- Added "Load CID & CSD Registers" feature to the eMMC/SD Advanced dialog.
It is possible now to load CID and CSD registers into currently connected eMMC context;
Format supported: log text files made with other boxes.



JTAGManager.exe

=======================
RIFF Box eMMC plugin/FS Explorer v4.10
RIFF Box eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v4.10
-------------------------------------
- Added partition parsing for some devices with TEGRA3 MCUs-style layout (example: LG P895)
- Now is possible to inject data into partition even if injected file size is greater than partition size. In this case only data of size equal to partition's size is injected.
- Added auto search for the Floating Partition Table feature when parsing dumps of MTK MCUs type. This further improves successful partition parsing for MTK devices
- Added autosearch for the MBR Record feature when parsing dumps of MTK MCUs type. This further improves successful partition parsing for MTK devices
- Added option 'Enforced search for the MTK Layout' - when checked this option activates auto search of MBR Table and Auto search of MTK Floating Partition Table
For unsupported MTK images or unknown images this option reads more memory zones, so it may take few more seconds (when reading layout from device) before analysis is complete.
When parsing any local dump this option cannot slow down the analysis because required extra disk reads happen very fast.
When parsing any supported image this option does not slow down any analysis.
So we recommend to keep this option always 'checked'
- Added support of 'chained' MTK's Floating Partition Tables (PMT)
- Added support of 64-bit MTK's Floating Partitions Tables (PMT)
- Added support of 'chained' MTK's BMTPOOL's Partition Tables (BMTPOOL)

==========================
RIFF Box updates, 11.06.2018


Sony Models boot repair, ISP pinout, Read/Write eMMC:
  • Sony C2305
Samsung Models boot repair, ISP pinout, Read/Write eMMC:
  • Samsung I8200
  • Samsung E250K
  • Samsung E250S
  • Samsung J105B
LG Models boot repair, ISP pinout, Read/Write eMMC:
  • LG H955
  • LG F400S
Nokia Models boot repair, ISP pinout, Read/Write eMMC:
  • Nokia Lumia 535 RM 1090
  • Nokia Lumia 630 RM 978
  • Nokia Lumia 635 RM 975
Lenovo Models boot repair, ISP pinout, Read/Write eMMC:
  • Lenovo S820
  • Lenovo P780
  • Lenovo P700I
  • Lenovo A3000F
  • Lenovo A390
Huawei Models boot repair, ISP pinout, Read/Write eMMC:
  • Huawei Y6 Pro TIT U02
  • Huawei Mate 7 MT7 L09
  • Huawei G8 RIO L03
  • Huawei Ascend Y530 U00
  • Huawei Ascend G526 L11
  • Huawei Ascend G525 U00
  • Huawei Y5 II (CUN-U29)
Asus Models boot repair, ISP pinout, Read/Write eMMC:
  • Asus Z010DA ZC550KL
  • Asus Z00ED ZE500KL
  • Asus Z00A ZE550ML
  • Asus T00P A500KL
  • Asus T00F A500CG
  • Asus T00G A600CG
  • Asus K012 FE170CG
  • Asus K008 ME571K
  • Asus K01A ME70CX
  • Asus K00Z ME175CG
Alcatel Models boot repair, ISP pinout, Read/Write eMMC:
  • Alcatel 5098O
Acer Models boot repair, ISP pinout, Read/Write eMMC:
  • Acer A1 810
To download and install updates, click "Check for Updates" button on "Box Service" tab.
You can also register an account at Turbo-Support download server:


Index of ../../RIFF/RIFF_ROOT/




RIFF Box v1 (Black box) users who havent used 15 days trial can activate it after installing JTAG Manager v1.76 and downloading new data.
In case that trial period is used but fw version is still 1.48 or older, please request trial reset in "Account recovery" section.






رد مع اقتباس
  #9  
قديم 07-03-2018, 02:51 AM
أحمد حزوري أحمد حزوري غير متواجد حالياً
Administrator
 
تاريخ التسجيل: Apr 2015
المشاركات: 7,757
آعجبنيً: 252
تلقي آعجاب 1,272 مرة في 849 مشاركة
4 RIFF Box v1/v2 updates - MTK, SPD, Samsung

RIFF Box v1/v2 updates - MTK, SPD, Samsung


RIFF Box eMMC Plugin 4.11
Samsung TAR/MD5/PIT , MTK Scatter and Spreadtrum PAC








RIFF Box eMMC Plugin 4.11 - Samsung TAR/MD5/PIT , MTK Scatter and Spreadtrum PAC support added


RIFF Box eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v4.11
-------------------------------------
- Added support for MTK Partition Table Version 1.1 (BMTPOOL)
- Main Menu is added to the top of the Main Window. Main purpose to specify shortcut keys.
- Added option to parse standalone Samsung PIT Files: for this just select the *.pit file as you do when selecting a local dump file and click "Parse Local Dump File"
- [Load Firmware Files]: added option to directly load the Samsung PIT Files (*.pit) - in this case after pit is loaded, the plugin browses PIT file's folder and loads partitions for which there are files present;
- [Load Firmware Files]: added option to directly load the GPT (MBR) binary block (*.bin) - in this case, if GPT/MBR is recognized and parsed, the plugin browses the file's folder and loads partitions for which there are files with identical to partitions names present (extention is not relevant);
- [Load Firmware Files]: added support for Samsung TAR Firmware files (*.tar, *.tar.md5)
- [Load Firmware Files]: added support for Spreadtum PAC Firmware files (*.pac)
- [Load Firmware Files]: When building partitions layout from Spreadtrum PAC Files, the SPLLOADER partiton (with Boot Partiton1 as target destination) is automatically added to the list, and SPL_Loader data (if present in the *.pac file) is injected into it;
- [Load Firmware Files]: old format of MTK Scatter Files is supported.
- [Load Firmware Files]: added option to load partitions from MTK Scatter File
You can choose either parse partitions from alive device/dump and then user Scatter File to load firmware files into partitions, or immediately create partitions list from Scatter File. In this case
it is required to select two parameters, which match real eMMC chip's: Boot Partition size and RPMB Partition size
- [Load Firmware Files]: Supported MTK Firmware's Container "BFBF": When loading firmware file packed inside of "BFBF" container, plugin automatically extracts the data from the container file and injects it into partition;
- [Load Firmware Files]: Supported Android Sparse Image Files Format: When loading Sparse Image, plugin automatically unpacks it and injects unpacked data into partition;
- [Load Firmware Files]: When loading MTK's PRELOADER into Boot Partition1, the 0x800-byte Mediatek's PRELOADER_HEADER is automatically generated, preloader file is appended to the header, and then the result is injected into boot partition;
- [Load Firmware Files]: When loading MTK's PGPT into PGPT Partition and if the PGPT parition base is 0x00, the 0x200-byte standard MBR Sector is automatically generated, PGPT file is appended to the MBR Sector, and then the result is injected into PGPT partition;

- Inject data into partition: Partition 'Fill-up' percentage is recalculated using size of currently injected file.
For example if partition size is 2MB, and injected file is 1MB, then partition fill-up percentage will be recalculated to 50%.
This will allow to flash this partition back to phone using only injected size, without flashing un-needed remaining partition's data.
This option is handly when flashing offical firmwares, when multiple paritions are injected with firmware data. Thus there will be no need to flash unnecesarry remnants
- changed "Load Layout from File" button caption to "Parse Local Dump File";
- changed "Load Layout from Device" button caption to "Parse Connected eMMC";
- changed "Load Firmware Files" button caption to "Parse Official Firmware";
- added "Re-parse by Scatter File" button - this options allows to discard any partitioning of curretly parsed Local Dump or Connected eMMC Chip, and apply new addresses of partitions from external Scatter File (as well there are more options to use other files with partition layout descriptions)
This option is handy if plugin is unable to parse partitions due to unknown format of memory contents: it is possible to create own scatter file with description of partitions (names, addresses and sizes) and apply it with "Re-parse by Scatter File" button to the unrecognized dump.
Please note, this option expects the Mediatek (MTK) Scatter File format, but can be applied to any non-recognized (non-supported) dump - no matter of the dump's source SoC (Qualcomm, Exynos, Spreadtrum, Mediatek, etc.)
- [Re-parse by Scatter File]: added option to re-parse partitions using a standalone MTK Layout's __NODL_PMT Binary File
- [Re-parse by Scatter File]: added option to re-parse partitions using a standalone MTK Layout's BMTPOOL Binary File

==================
RIFF Box updates, 26.06.2018


New models boot repair, ISP pinout, Read/Write eMMC:

  • Acer B1-730HD
  • Alcatel OT5044D
  • Archos 70 Xenon Color
  • Artel Artel Adi5
  • Artel Artel NOVA
  • Huawei MediaPad T1 (T1-701U)
  • Lenovo A2020a40
  • Lenovo S860
  • Lenovo S2110
  • LG D700
  • LG D820
  • LG H343
  • LG H700
  • LG VS425PP
  • Micromax E313
  • Micromax Q415
  • Nokia 3 (TA-1032)
  • Nokia Lumia 820 (RM-825)
  • Samsung G350E
  • Samsung G361F
  • Samsung I9060M
  • Sony E5603
  • ZTE A452
  • ZTE L5 Plus


Pinouts updates:
  • Asus Z00A (ZE550ML)
  • Asus ZenFone2 (ZE551ML)
To download and install updates, click "Check for Updates" button on "Box Service" tab.
You can also register an account at Turbo-Support download server:


Index of ../../RIFF/RIFF_ROOT/




RIFF Box v1 (Black box) users who havent used 15 days trial can activate it after installing JTAG Manager v1.76 and downloading new data.
In case that trial period is used but fw version is still 1.48 or older, please request trial reset in "Account recovery" section.

===============
RIFF Box Firmware 1.50
---------------------------
- Fixed RIFFBOX2 Firmware bug: when reading any data from eMMC Chip, the Data CRC16 was not checked, so even data received with errors was considered to be valid.
Now RIFFBOX2 Firmware detects data CRC16 errors, and guarantees data read from eMMC chip is valid.
RIFFBOX1 Firmware is not affected by this bug, but firmware update is required to update to 1.50 version string.
- Fixed timing bug which prevented to change BOOT and RPMB partitions sizes



RIFF Box JTAG Manager 1.79
---------------------------
- Added context menu for the PKG editor - right-click on data write actions allows to perform alignment of the selected ation's data. Normally alignment is performed when adding new write memory action.
This feature allows to align actions in selectable manner, after all write actions were added to the list. This feature is handy when adding full list of write actions via eMMC Plugin,
and when some partitions are required to remain full size, and others are allowed to be cut/aligned
- "eMMC/SD Access" Page -> "Data Length" Field, ComboBox with pre-set lengths, 'File Size': when selected, Data Length field is filled with value equal to selected File's size.
Now File size is automatically aligned to 0x200. JTAG Manager automatically handles non-aligned to 0x0200 files - the remaining data is filled with 00s.
- Added "Load EXT_CSD Register" feature to the eMMC/SD Advanced dialog. It is possible now to load 0x200-byte EXT_CSD register into currently connected eMMC context;
Format supported: plain binary format, 0x200 bytes size of file; most often these are files with extentions '*.bin' and '*.extcsd';
- Added "Load CID & CSD Registers" feature to the eMMC/SD Advanced dialog.
It is possible now to load CID and CSD registers into currently connected eMMC context;
Format supported: log text files made with other boxes.


JTAGManager.exe

=================
RIFF Box JTAG Manager 1.80
---------------------------
- Fixed save file bug: After JTAG Manager showed there is no Free Disk Space to save the file, consequtive Save attempts resulted in errors.
- Fixed keyboard layout switching when RichEdit component is activated (these are forms containing instructions, help, etc - like Resurrection Manual, Useful Plugins description text, etc)
- Firmware update procedure is improved


JTAGManager.exe

==============
I see that some users don't understand how can they obtain license files, to use RIFF Box v1 for JTAG functions.


Since new licensing scheme was introduced we had regular free periods during which users could obtain license and use it without limits until disk format or accidental erasure.


All RIFF Box v1 expired accounts received 15 days trial. If You haven't used trial period, skip to license download instructions:


To obtain RIFF Box v1 JTAG license for free, please do this:


1. Register account at Unlock Forum (if already not registered)
2. Join "RIFF Box users" group
3. Go to Support Tickets-> Account Recovery section and click Submit new thread.
4. Provide box SN in message and "Trial Reset" in subject
5. When request is solved, Your thread will be moved to "Solved" subsection.


---
Now You have 15 days free trial, during which You can use full functionality of RIFF Box (both JTAG and eMMC). You should download all DLL files You may need too.

To enable JTAG functions, do this:


1. Start JTAG Manager v1.78 and download required license files and any other file You need. Update firmware to v1.49 if requested.

2. Select "Custom JTAG Target Settings" in upper right drop down menu

3. Switch to JTAG Read/Write TAB and click "Connect & Get ID"

4. Download license


Now, You can use RIFF Box v1 JTAG functions as long as there is no changes in DLL-s or RepairPacks directory.



رد مع اقتباس
  #10  
قديم 08-29-2018, 11:54 PM
أحمد حزوري أحمد حزوري غير متواجد حالياً
Administrator
 
تاريخ التسجيل: Apr 2015
المشاركات: 7,757
آعجبنيً: 252
تلقي آعجاب 1,272 مرة في 849 مشاركة
4 RIFF Box = 30.08.2018

RIFF Box = 30-08-2018


RIFF Box updates, 30.08.2018:

- 25 new resurrector DLL-s
- RIFF Box firmware v1.51
- RIFF Box JTAG Manager v1.81
- RIFF Box eMMC Plugin v5.0


We added support for Qualcomm EDL mode via USB cable, Sahara protocol both Firehose and Streaming download.
Support for UFS chips and few important bug fixes for v1 box ISP resurrection.














RIFF Box eMMC Plugin v5.0 released -USB Qualcomm and UFS chips support

eMMC Partition Table FullFlash Image Files Processing Plugin (eMMCDiskPartitions.dll) v5.00
-------------------------------------


- added USB Connection Mode (Qualcomm Sahara)
- added support for parsing EFI,PIT,MBR-type dumps from UFS memory (Page Size = 0x1000)

- added option to select active Partition to be parsed - in this case "Parse Connected Memory' button will parse precisely the selected partition,
and "Parse Local Dump File" button will assume that parsed dump was read from the specified partition;
- [Parse Official Firmware]: Improved loading MTK partition files which are named with prefix '__NODL_' while on disk those are named without prefix.
- [Parse Official Firmware]: fixed the bug when clicking the "Read Form Connected Device" button to read partition sizes during the MTK scatter file parsing did nothing.
- for PIT/EFI parsed dumps/devices improved parsing when 'Show Gaps' is checked; __NOT_ALLOCATED space at the end of image file is autodetected for BACKUP_GPT partition.
- added automatic select/deselct all partitions feature to context menu (right-click on partitions list, then chose desired action)
- fixed the bug when plugin loaded (injected) in total more than 2GB of partitions data then reading wrong data could occur.
- default chip size (which is used when expanding expandable partitions - those with size = 0) is changed flrom 64GB to 512GB
- [Load Firmware Files]: fixed bug when loading firmware files from GPT partition: if "gpt_backup" file was present, the gpt_backup file was loaded into gpt partition, instead of 'gpt_main';
- fixed EXT4 File System Parser bug: 64bit addressing was handled incorrectly, thus some contents (directories/files) may be not parsed
- EXT4 File System Parser is optimized, parsing is done much faster
- Fixed file names encoding in EXT4 File System Parser. Now names are recognized as UTF-8 strings
- when loading official firmware, the partitions list is automatically rewinded to always keep showing currently loaded partition progress;
- reworked the main interface window - now parsed partitions list and File System contents explorer are moved to separate pages.
- File System contents explorer now builds the list of all partitions detected with supported file systems at once; to initate the parsing of selected partition just enough to expand its tree node
- added 'Preview' to the The contents explorer. It is possible to instantly start checking the selected file's conents - supported currently: text files, picture files, ELF files.
To check the file it is not necessary to export it to the hard disk first, just click on file and in preview window the contents of the file will be displayed.
- [Parse Official Firmware]: added support for Qualcomm XML programming files: to load click the "Parse Official Firmware" button and select Qualcomm's XML file (like rawprogram0.xml); Plugin will create list of partitions from it,
will load required files into partitions and will be instantly ready to flash those into connected device.
- Renamed old buttons 'Read Selected', 'Flash Selected' to 'Read Selected Full Area', 'Flash Selected Full Area'
and added 'Flash Selected Used Area' button: it is possible now to flash either only the used area of partition or the full partition area.
For example, if full partition size is 1GB, but the meaningfull data file injected into it was 1MB, there is no point flashing full partition area (1GB). Instead, to save time just first 1MB can be flashed with 'Flash Selected Used Area' button
This feature is especially useful when flashing partitions after [Parse Official Firmware] is executed.
- [Parse Official Firmware] - optimized parsing firmware file. Loading any firmware files now happen almost instantly. Plugin now works with external files of partitions on-the-fly, so it is not required now to waste time injecting file's data into partition during parsing stage.
Sparse packed files are handled on-the-fly as well. All operations are performed in the background.
From the user point of view, you just keep working with the parsed partitions as usually - as if local dump were loaded and parsed.





RIFF Box Qualcomm Sahara support, tips and tricks

Hello dear users !


We took some time to prepare latest addition to JTAG Manager and built from scratch complete Sahara protocol support (both firehose and streaming download). We didn't just embedded freely available tools from Qualcomm (emmcdl and qh_loader), instead, we used own code.


Great work is done on eMMC Plugin too, which now supports USB, ISP and JTAG access. You can select partition on LU (Logical Unit) to parse.
Among other improvements, we added GPT repair/adjust which serves as analogue to patch0.xml used with QFIL.
"Adjust GPT" will automatically update checksums and resize userdata partition to fill whole chip. This is valuable in cases where gpt is from different chip size.


There is more work, but we feel confident that current functions can satisfy most of the needs in servicing and forensics fields.


So, for start, few important tips:


1. Make sure to have Qualcomm drivers installed
2. Most Snapdragon 200 firehose loaders don't have read support, also some will not output storage info (size, SN, brand). We found out that there is one universal firehose looader which supports all this, but uses a bit different protocol. As this is Alcatel loader, we named it "Alcatel Firehose".
It can be used with MSM8x10, MSM8x12, MSM8x26 which otherwise don't have read support. File is attached here.


3. Sahara protocol requires phone to be in EDL mode. To enter EDL mode, exist few methods:
1. Kill phone BootChain or GPT [IMG]http://www.****************/images/smilies/biggrin.gif[/IMG]
2. Switch to EDL from ADB or from TWRP: (TWRP tested on some Samsung models)

"Adb reboot EDL"
3. Use EDL cable (Xiaomi phones for example)
4. Activate Diag mode and JTAG Manager will switch it to EDL automatically if phone supports it.
5. Hold Vol+ for 10 seconds (OnePLus models)

6. Short EDL TP-s if exist
7. Short CMD to GND
9. Most reliable method is to remove eMMC [IMG]http://www.****************/images/smilies/biggrin.gif[/IMG]




I'll add some videos to this post later, for now please test functionality and ask for clarification if there is anything unclear.




RIFF Box DLL updates, 30.08.2018


New Resurrector DLL-s today:


USB:
  • OnePlus 3T
  • Xiaomi Redmi Note 5A (MDG6)
  • LG D855
  • LG D724

ISP:
  • LG D686
  • LG N3 Nexus 5X
  • Samsung J330F
  • Samsung T585
  • Samsung J200F
  • Samsung J120G
  • HTC One X S702e PJ4610000
  • HTC One SV V520e PL8013000
  • HTC One M9 0PJA20040
  • HTC One M8 0P6B70000
  • HTC One M7 PN0711000
  • HTC One DS PN0771000
  • HTC Desire D816V 0P9C80000
  • HTC Desire D500 0P3Z11200
  • HTC Desire 626 0PM921000
  • HTC Desire 616 0PBM10000
  • HTC Desire 601 0P4E21000
  • HTC Desire 526G 0PL410000
  • HTC Desire 510 0PCV20000
  • Fly IQ4505
  • Xiaomi Redmi Note 4




RIFF Box JTAG Manager v1.80
RIFF Box firmware v1.50


RIFF Box Firmware 1.50
---------------------------
- Fixed RIFFBOX2 Firmware bug: when reading any data from eMMC Chip, the Data CRC16 was not checked, so even data received with errors was considered to be valid.
Now RIFFBOX2 Firmware detects data CRC16 errors, and guarantees data read from eMMC chip is valid.
RIFFBOX1 Firmware is not affected by this bug, but firmware update is required to update to 1.50 version string.
- Fixed timing bug which prevented to change BOOT and RPMB partitions sizes

RIFF Box Firmware v1.51

- fixed RIFF1 firmware bug which caused random box restarts during ISP flashing
- fixed RIFF1 firmware bug which caused freezing during consequtive eMMC write operations in single session
- fixed RIFF1 & RIFF2 firmware bug which caused erasing the first block of eMMC chip's user area after reading eMMC firmware or reading Samsung Smart Info


RIFF Box JTAG Manager v1.81

- added USB mode: it is possible to connect supported devices via USB cable; (Qualcomm Sahara Firehose and Streaming Download protocols)
- added UFS memories support via USB interface.

- added feature to remember each partition address and length settings on USB read/write page;
- added feature to remember each partition address and length settings on eMMC read/write page;
now when partition is changed, the relevant Address and Length fields are changed to correspond values which were set for selected partition;
- fixed an issue with settings when there are no downloaded resurrectors or if there are not all kinds of resurrectors are present;
Now informative dialogs are displayed for users to be able to clue out what's to be done.
- fixed an issue when user tries to select Resurrectors filter (for example to filter only ISP Resurrectors) and there are no Resurrectors of the selected Filter kind;
Now informative dialogs are displayed for users to be able to clue out what's wrong. And deadloop with settings is avoided now.
- added information on the Plugins page - in case there are no plugins are downloaded yet, the not experienced user can see information about plugins and how to get them;
- revised the "Resurrector Settings" logic: renamed to "Automatic Parameters" and "Manual Parameters by User".
When selected "Automatic Parameters", the required connection settings are used from the Resurrector DLL: for all modes - JTAG, eMMC, USB.
Please note, any settings (values) present in the ISP Resurrector DLLs are copied when DLL is selected and are not forced not to be changed later by user.
Thus for ISP mode, all settings (interface, SD_CLK, voltage and bus width) can be modified anytime, and are not grayed out in the "Automatic Parameters" mode.
When selected "Manual Parameters by User", the required connection settings are used from correspondent fields.
Additional checks added to eliminate irregularities during connection to the device when incorrect mode DLL is selected in the list.
Message dialogs are displayed to inform user what has to be done in order to fix the problems
- completely reworked scenarios for cases when "Automatic Parameters" or "Manual Parameters by User" option is selected
It now complies to following rules: when "Manual Parameters by User" are selected, the settings block is changed depending to currently active Page.
For example, if eMMC Read/Write page is active, ISP settings block is displayed, if DCC Read/Write page is active, JTAG Custom Settings block is displayed, etc.
In case "Automatic Parateres" is selected, no matter what active page is selected, the settings block which corresponds to the mode of selected resurrector is displayed.
This helps to eliminate illogical scenarios - for eample, when selected resurrector is ISP Resurrector and user tries to Read/Write memory on DCC Read/Write Page.
In this case Error Message dialog is displayed for user.
- implemented more informative and self-explainable run-time rebuild of the JTAG Manager's settings blocks interface when Automatic Parameters" or "Manual Parameters by User" are selected.



=============

RIFF Box JTAG Manager 1.79
---------------------------
- Added context menu for the PKG editor - right-click on data write actions allows to perform alignment of the selected ation's data. Normally alignment is performed when adding new write memory action.
This feature allows to align actions in selectable manner, after all write actions were added to the list. This feature is handy when adding full list of write actions via eMMC Plugin,
and when some partitions are required to remain full size, and others are allowed to be cut/aligned
- "eMMC/SD Access" Page -> "Data Length" Field, ComboBox with pre-set lengths, 'File Size': when selected, Data Length field is filled with value equal to selected File's size.
Now File size is automatically aligned to 0x200. JTAG Manager automatically handles non-aligned to 0x0200 files - the remaining data is filled with 00s.
- Added "Load EXT_CSD Register" feature to the eMMC/SD Advanced dialog. It is possible now to load 0x200-byte EXT_CSD register into currently connected eMMC context;
Format supported: plain binary format, 0x200 bytes size of file; most often these are files with extentions '*.bin' and '*.extcsd';
- Added "Load CID & CSD Registers" feature to the eMMC/SD Advanced dialog.
It is possible now to load CID and CSD registers into currently connected eMMC context;
Format supported: log text files made with other boxes.


JTAGManager.exe



RIFF Box JTAG Manager 1.80
---------------------------
- Fixed save file bug: After JTAG Manager showed there is no Free Disk Space to save the file, consequtive Save attempts resulted in errors.
- Fixed keyboard layout switching when RichEdit component is activated (these are forms containing instructions, help, etc - like Resurrection Manual, Useful Plugins description text, etc)
- Firmware update procedure is improved



JTAGManager.exe





رد مع اقتباس
إضافة رد

مواقع النشر (المفضلة)

الكلمات الدلالية (Tags)
, , , , , ,

أدوات الموضوع إبحث في الموضوع
إبحث في الموضوع:

البحث المتقدم
انواع عرض الموضوع

تعليمات المشاركة
لا تستطيع إضافة مواضيع جديدة
لا تستطيع الرد على المواضيع
لا تستطيع إرفاق ملفات
لا تستطيع تعديل مشاركاتك

BB code is متاحة
كود [IMG] متاحة
كود HTML متاحة

الانتقال السريع

المواضيع المتشابهه
الموضوع كاتب الموضوع المنتدى مشاركات آخر مشاركة
جميع تحديثات روابط تحميل واجهات إن سي كيه برو - NCK Pro 2 Updates أحمد حزوري إن سي كيه برو+يو إم تي+أفينجرز = NCK Pro+Avengers+UMT 67 05-24-2019 04:11 AM
جميع تحديثات زد ثري إكس إيزي جيتاغ - Z3X Easy Jtag Updates أحمد حزوري زد ثري إكس إيزي جيتاغ بلس = Z3x Easy Jtag Plus 10 01-11-2019 05:26 AM
تفعيل جيتاغ أدفانس ATF JTAG EMMC activation أحمد حزوري أدفانس توربو = Advance Turbo ATF 0 07-24-2015 02:57 AM
الموديلات التي يدعمها بوكس RIFF Jtag Box أحمد حزوري ريف جيتاغ = Riff Jtag 0 07-18-2015 04:41 AM
New Samsung Updates Online رضوان ابراهيم فلاشات سامسونغ = Firmware Samsung 0 06-24-2015 11:14 AM


الساعة الآن 10:18 AM