إن سي كيه برو 3 في 1 - أفينجرز + يو إم تي + إن سي كيه = Nck Pro+UMT+Avengers بسعر قطعة واحدة

[أحمد حزوري]

إن سي كيه برو 3 في 1
=====
إن سي كيه برو 2
+
أفينجرز
+
يو إم تي برو
===
Nck Pro2 + UMT Pro + Avengers
129+129+129
=
387
أنت سوف تدفع
129 دولار فقط
وتحصل على ال 3
بسعر قطعة واحدة


للمزيد من التفاصيل
جميع تحديثات روابط تحميل واجهات إن سي كيه برو
NCK Pro 2 Updates

أبو جبريل

تلفون - واتس - فايبر - لاين

00905367214617

[أحمد حزوري]

سوف نعرض لك بعض الصور والواجهات
التي سوف تعمل عليها مع هذا العرض

وسوف تحكم على قوة العرض بنفسك

بعض العمليات الناجحة على يو إم تي UMT بالصور


بعض العمليات الناجحة على أفينجرز Avengers بالصور

[أحمد حزوري]

NCK Pro Main

[أحمد حزوري]

NCK Pro + Avengers
MTK





































Flash



imei



Unlock

[أحمد حزوري]

NCK Pro + Avengers
Generic MTK

How to extract Unlock Code from backup. 1.Make Calibration backup. 2.Press "Extract Unlock Code From Backup". 3.Select Backup Directory. 4.Get unlock code from backup. Please note, some phones not accept this metod, or can have default code inside "12345678". But for many phones this metod will work, give a try. This metod is safe and will not damage phone if not work. Second metod to direct extract unlock code. 1.Click on process simlock file from calibration backup. 2.select file what start with ST33 or MP33(located in backup foler\nvd_data or nvd_imei . 3.If file is ok must be displayed unlock code and unlock state. 4.select second file(if ST33 must be 2 files) if want direct unlock phone. If not , simple enter code displayed. 5.Restore backup. P.S.(after selecting, this files will be recalulated to unlocked state). How to disable user code without data lost in phone(hard way). 1. Start FileManager. 2. Got to folder "NVRAM\NVD_DATA". 3.Locate file MP45_XXX(can be any digits, important is MP45). 4.Backup this file, just in case. 5.Delete this file. After restart phone usercode must gone.

[أحمد حزوري]

NCK Pro Qualcomm

HELP QUALCOM. Phone must be in EDL or DIAG mode. To swith in EDL mode need to hold "VOL-" and "VOL+". And insert usb cable on powered off phone. If phone will be in diag mode,exe will try to swith auto in edl mode. Some phones have diag port in charging mode also. Can be used ADB from "UTILS" tab to swith in EDL. Also exe will try to swith in EDL from pid_0006 mode. If exe will send loader, but loader will not start, posible loader is not accepted by phone and need to use loader from some firmware package. ================== HELP ALCATEL QUALCOM. How to enable diagnostic port. 1.Disable usb debugging if enabled 2.Type "###2324#" in dial screen. 3.Phone must display "Diag Protector OFF". 3.1.Some phones will open window with diag setting. 3.2.Check "diag" checkbox in this window . 4.Install phone drivers if need use "AlcatelQualcomDrivers.rar" from support. 5.Extract arhive and use "DriverInstaller.exe" to install or uninstall drivers. 6.Check if diagnostic drivers is installed in device manager. How to view device info. 1.Type "*#2886#" in dial screen. 2.Select "MANU" mode and select needed item. 2."TRACEABILITY" will display imei, wifi, pid e.t.c. How to write cu referince(pid) Imput needed cu referince(must be valid) Press write button. To read phone info, use Read button. EXAMPLE: V895N-2HVDES1 This example is for Vodafone 895n model. For other phones, model name will differ. =============== HELP MOTOROLA QUALCOM. Power off phone, Hold VOL DOWN and press power for 2 seconds, leave power button. Use VOL DOWN to scroll to Factory Mode, and select by VOL UP. Let phone start, install drivers. Click on Enable ADB. Now turn off phone, and again start in Factory Mode. After click on Erase FRP. ======================

[أحمد حزوري]

NCK Pro SPD

SPRD Generic Diagnostic mode: *#*#83781#*#* Alcatel SPRD Android test menu: *#2886# Huawei SPRD Android test menu: *#*#14789632#*#* Service phones diag mode. 1.Phone must be off with battery inside. 2.Press enter diag button. 3.Insert usb cable when exe ask. 4.Perform needed opperation. Diagnostic opperations can be performed on powered on state also. 1.Power on phone. 2.Insert usb cable. 3.Select com port or diag if phone ask. 4.Enter diag auto or selecting manually port. [Android] Service phones flash mode. 1.Phone must be off with battery inside. 2.Keep press "VOL-", for some phones "VOl-" + "VOL+" together 3.Insert usb cable when exe ask. 4.Perform needed opperation. [Generic]Service phones flash mode. 1.Phone must be off without battery. 2.Insert usb cable. 3.While keep long boot key, insert battery when exe ask. 4.Perform needed opperation.

[أحمد حزوري]

UMT - Qc Fire - Qualcomm

[أحمد حزوري]

UMT - Ultimate Multi Tool
Main GSM

[أحمد حزوري]

NCK Pro + UMT
CDMA